1. IR infrared sensor, using dual-channel dual-filter infrared technology.

2. The inner tank is designed with full-radius corners and the surface is made of 304 mirror finish stainless steel.

3. Adopt double heating module, six side heating.

4. The cavity is uniformly heated by silicone rubber heating wire heater with aluminum foil-wrapped, offering rapid temperature rise and good uniformity.

5. Equipped with leakage current and over-voltage protectors. Features over-temperature, under-temperature, over-concentration and under-concentration alarms.

6. HEPA high-efficiency filter, with a filtration efficiency of 99.97%.

7. HermeSEAL^® technology, with its patented encapsulated infrared assembly, resists high temperature, high humidity, and corrosive environments, ensuring long-term stability even in harsh conditions.

8. The sensor prevents condensation upon power-on, avoiding failures caused by moisture and ensuring more stable and reliable measurements.

Technical Parameters:

The post CO2 Incubator 50L 80L 160L 180L 220L 300L appeared first on Keylaser Armenia.

Features:

1. Exterior material is powder-coated carbon steel, interior material is mirror finished stainless steel.

2. The temperature is controlled by a ‘Super Fuzzy PID’ system, featuring smaller overshoot, faster stabilization time, and better temperature control accuracy.

3. High-quality DC brushless motor features minimal vibration, low noise, high efficiency, maintenance-free operation, energy saving, and long-lasting performance. Equipped with single-axis balanced drive technology for ultra-low silent operation.

4. Equipped with over/under temperature alarms and abnormal shutdown alarms.

5. Automatic audio and visual alarms are triggered in case of shaker(Motor) malfunction or if the door is not properly closed.

6. The motor rotation direction can be set to forward, reverse, or alternating forward/reverse.

7. Programmed mode, which allows for multi-stage settings, and constant mode, which runs continuously at the set temperature and speed after configuration.

Technical Parameters:

The post Large Capacity Vertical Type Shaking Incubator 610L appeared first on Keylaser Armenia.

1. Exterior material is powder-coated carbon steel, interior material is stainless steel.

2. The unique airflow duct design ensures superior temperature uniformity within the chamber, enabling more accurate temperature sensor data acquisition.

3. The temperature is controlled by a ‘Super Fuzzy PID’ system, featuring smaller overshoot, faster stabilization time, and better temperature control accuracy.

4. Features a brushless DC motor with PWM speed control. The acceleration control circuit ensures gentle startup, smooth acceleration, and safe handling of experimental samples.

5. Three-dimensional biased three-wheel drive mechanism provides exceptionally smooth, stable, durable, and reliable operation.

6. The outer door utilizes insulated tempered electric heating glass that effectively prevents glass fogging and condensation around the door frame.

7. Our proprietary silicone sealing strip, made from eco-friendly silicone material, provides superior contact with the chamber surface for enhanced sealing and improved thermal insulation performance.

8. The motor rotation direction can be set to forward, reverse, or alternating forward/reverse.

Technical Parameters:

The post Large Capacity Vertical Type Shaking Incubator(Double Door & Double Layer) appeared first on Keylaser Armenia.

1. The housing is made of cold-rolled steel plate with electrostatic spray coating, and the inner chamber has rounded corners for easy cleaning.

2. The door and chamber are sealed with a specially designed silicone gasket to maintain vacuum, while allowing easy opening in non-vacuum conditions.

3. The temperature control system uses a microcomputer PID design with an intelligent color LCD display, providing precise temperature regulation, timing, and over-temperature alarm functions.

4. The double-layered glass door allows clear observation of items inside the chamber.

Technical Parameters:

The post Vacuum Drying Oven 25L 50L 25L 50L appeared first on Keylaser Armenia.

1. LCD display shows multiple sets of data simultaneously.

2. Contactless circuit control system, features upper-limit alarm and timed auto power-off functions.

3. Acrylic material observation window with an independently switchable lighting system.

4. Four-sided surround heating technology ensures uniform temperature distribution inside the chamber.

5. Adjustable sliding shelves allow flexible height configuration.

6. Silicone rubber magnetic seal provides easy opening/closing and excellent airtightness.

7. Supports portable power supply for field operation.

Technical Parameters:

The post Portable Constant-Temperature Incubator appeared first on Keylaser Armenia.

1. 7.0-inch touch display screen, simple and easy to understand and operate, convenient for observation.

2. Double-layer glass door design, the outer door is equipped with an extra-large viewing window for easy observation.

3. Unique automatic defrost design, with minimal temperature fluctuation during defrosting.

4. Mirror-finished stainless steel interior, rounded corners, shelves are removable and height-adjustable, easy to clean, and helps maintain a clean working chamber environment.

Technical Parameters:

The post Mould Incubator 100L 150L 200L 250L appeared first on Keylaser Armenia.

Technical Parameters:

The post Optional Shaking Incubator Accessories appeared first on Keylaser Armenia.

2. The display interface has the functions of historical data, curve, alarm record can be queried, data can be saved and exported, password lock screen protection and Chinese and English switching.

3. Humanized design of the door stop function, to protect the safety of personnel.

4. Box padding foot height adjustable, standard universal casters, easy to move the box.

5. Professionally designed side air vents to meet the oxygen requirement of samples.

Technical Parameters:

The post Vertical Type Shaking Incubator appeared first on Keylaser Armenia.

1. The 7-inch color LCD touch screen can monitor temperature and humidity curves in real-time and query operation history records on one screen.

2. The PID microcomputer-controlled temperature allows fixed-value and segmented operations.  It has a parameter memory function and can resume operation automatically after power-on.

3. There are a built-in steam humidification system and an independent PID humidity control system.

4. Three levels of operation interface permissions(administrator, experimenter, operator) prevent test interruption or equipment malfunction caused by unauthorized operations.

5. The inner liners are made of high-quality stainless steel with a semi-circular and four-corner design.

6. The unique refrigeration system has an automatic defrosting function and a blower for forced convection to make the temperature more uniform.

7. Equipped with an alarm system: high temperature alarm, low water level alarm, independent overheat protection device, and over-current protection.

Technical Parameters:

The post Constant Temperature And Humidity Incubator BJPX-HT1000(PC) appeared first on Keylaser Armenia.

It is suitable for a wide range of fields such as cytology, biology, oncology, genetics, immunology, virus research and genetic engineering research. It is an ideal device for the cultivation of cells, tissues and bacteria in scientific research units and industrial production departments such as biochemistry and agricultural science.

Features:

1. IR infrared sensor, using dual-channel dual-filter infrared technology.

2. The design of multiple small doors reduces the amount of air exchange between the outside space and the inside of the incubator during the opening process.

3. Inner tank is made of 304 mirror finish stainless steel, featuring a semi-circular corner design for faster and more effective bottom cleaning and sterilization.

4. The design of the 3D airflow channel ensures uniform CO2 distribution, enhancing the accuracy of IR sensor data collection.

5. The interior is heated uniformly by aluminum foil-wrapped silicone heating wires, ensuring rapid temperature increase and excellent uniformity.

6. High quality HEPA filter ensures the inside gas quality.

7. SMC brand solenoid valves ensure more stable gas concentration and less consumption of gas.

8. Equipped with leakage current and over-voltage protectors. Features over-temperature, under-temperature, over-concentration and under-concentration alarms.

9. The water reservoir in the bottom chamber ensures high humidity.

Technical Parameters:

The post CO2 Incubator 100L 160L 200L 300L appeared first on Keylaser Armenia.