Water Purifier(RO&DI Water)

Introduction:
Laboratory water purifier is a pure water preparation equipment specially used in laboratories, which converts tap water or other water sources into high-purity water that meets laboratory requirements through a series of physical and chemical processes. These processes include pretreatment, reverse osmosis, ion exchange, ultrafiltration, UV sterilization, etc., to ensure that the quality of the final produced water meets or exceeds the standards required by the laboratory.

  • SCSJ-I-10L SCSJ-II-30L
  • BIOBASE

Technical Parameters:

Model SCSJ-I-10L SCSJ-II-30L
Water Output Type RO&DI water
Water Output Speed 10L/H 30L/H
Purifying Procedure PF+AC+RO+DI
Water Supply Requirement Tap water: TDS<200ppm, 5~45℃, 1.0~3.5Kgf/cm2
Pre-treatment 10″ PP filter*1+10″ activated carbon*2 10″ PP filter*1+10″ active carbon filter*1
RO Unit 50 GPD RO membrane*1 300 GPD RO membrane*1
Subsequent Unit Deionization purification column*2 Deionization purification column*1
Pure Water Quality Soluble organic matter: Rejection rate>99%(molecular weight>100)
Particle: Rejection rate>99%
Microbe: Rejection rate>99%
Salt rejection rate: >99%
TDS (total solids solubility): RO water: 5~20ppm
Resistivity: 10~18.25MΩ.cm
PM(particulate matter)(>0.22μm): <1/ml
Conductivity: 0.055~0.1μs/cm
Microbe/Germ: <1CFU/ml
Water Quality Monitor TDS(Total Dissolved Solids) meter Electrical conductivity tester
Consumption 46W 113W
Power Supply AC220±10%, 50/60Hz; 110±10%, 60Hz
Standard Configuration Main body(Include 1 set of cartridges)+TDS meter
External Size(W*D*H) 390*400*503mm 325*403*650mm
Package Size(W*D*H) 500*520*650mm 460*420*1200mm&670*400*260mm
Gross Weight 27kg 40kg
Scroll to Top