Features：
1. It adopts PWM control switch power supply, and the power is continuously adjustable
2. It adopts 7 inch TFT touch screen display, high resolution
3. Central microcomputer centralized control
4. Ultrasonic time, power arbitrary setting
5. Sample temperature detection display, power display,microcomputer tracking,automatic fault alarm
6. Sound Abating trap adopts sheet metal,spray plastic,ABS material,die design,with lock function.
Application :
Ultrasonic shredders can be used to pulverize animals, plants, bacteria, dental spores or tissues. Disperse rare earth and various inorganic mineral powders.
Ultrasonic pulverizers are ideal for accelerating chemical, biological, and physics reaction rates and accelerating liquid degassing.
The ultrasonic pulverizer can prepare nearly one micron of latex size; homogenize the “immiscible” mixture; polymerize some substances and precipitate other substances.
In summary, the ultrasonic pulverizer can realize various functions of extraction, pulverization, emulsification, homogenization, suspension, variability, aerosol suspension, accelerated desolvation, crystallization and preparation of various biological samples under an electron microscope.
Main Technical Parameters
| Frequency | 20-25KHZ automatic tracking |
| Power | 950W (1%-99%) |
| Display | 7 inch TFT touch screen |
| Display content | Time,Power,Temperature |
| Processing volume | 0.5-600ml |
| Duty Ratio | 0.1-99.9% |
| Accompany | Φ6mm |
| Optional Tip | Φ2,3,10,15mm |
| Storage data | 50 groups |
| Temperature alarm | 0-99℃ |
| Alarm | Over-temperature,Overload, and overtime |
| Timing | 0-999min |
| Working mode | Gap/Continuity |
| Standard configuration | Generator host 1pc,Sealed transducer 1pc,Φ6mm Tip 1pc,Sound Abating trap 1pc |
Use of horn selector switch
The horn selector switch is used to match the frequency and impedance consistency of the horn and generator of different specifications. If the frequency of the transducer assembly does not match the impedance of the generator, the ultrasound will not work.
When a new instrument or a new horn is used, the selector switch should be in the corresponding position. When the horn is worn, the switch can be toggled until the ultrasonic operation is normal. At this time, the gear position does not necessarily correspond to the horn specifications.
The horn selection switch of the ultrasonic cell pulverizer is generally placed at the position corresponding to the horn. When the horn is worn, the user can freely select the gear until the ultrasound works normally. At this time, the gear and the amplitude change Rod specifications do not necessarily correspond.
