◣New type touch display ultrasonic homogenizer
1)As a new type of ultrasonic homogenizer,it enjoys complete functions, novel appearance and reliable performance.
2)It has a large-screen display and concentrated control by a central computer.
3)The ultrasonic time and power can be set accordingly. Besides, such functions as sample temperature display, actual
frequency display, computerized tracking and automatic trouble warning can all be displayed in the large LCD screen.
◣Instructions for use
1.Before use, clean the ultrasonic probe with water and wipe the probe clean with paper.
2. Place the beaker’s solution to be crushed and the boxed ice water mixture under the probe, lift the base, and let the probe penetrate into the solution, with a distance of 1 cm from the bottom of the beaker, and place the probe in the center of the beaker. Close the door at your fingertips.
3. Turn on the instrument switch and press the Set button twice to set the total time, ultrasonic time, ultrasonic interval time, and press the OK button.
4. Click “On” to observe the ultrasound condition through the glass. If there is any abnormality, immediately click “Stop”. Re-arrange and confirm that it is correct, start ultrasound.
5. After the end of the ultrasound, take out the broken solution and wash the ultrasonic probe with 20% ethanol.
◣Main Technical Parameters:
◣Packing List：
1) Ultrasonic generator： 1
2) Vibration system(ultrasonic transducer subassembly)： 1
3) Soundproof box 1
4) Cross clamp(in soundproof box)： 1
5) Pest tube clamp(in soundproof box)： 1
6) Power line plug 1
7) Special spanner(used to dismantle variable amplitude lever) 1
8) Fuse： 4
9) Operating instruction： 1
10) Certificate： 1
11,Quality Guarantee(quality service card)： 1
