The portable ultrasonic pulverizer is a versatile, multi-purpose instrument that uses ultrasonic waves to create cavitation effects in liquids. For cell pulverization, emulsification, dispersion, homogenization, extraction, defoaming, cleaning, preparation of nanomaterials and accelerated chemical reactions.
The instrument adopts liquid crystal display, and has two working modes: automatic and manual (foot), ultrasonic time, power arbitrary setting, sample temperature detection display, frequency automatic tracking and other functions. Ultrasonic cell pulverizer for small volume sample processing.
Performance Characteristics
It can be used for 96-well enzyme labeling and countless small tube arrays. The ultrasonic transducer is used to control the ultrasound by jogging, so that countless samples can be sonicated in a short time.
Technical Parameters
| Maximum ultrasonic power output | 250W | Total Time | 0.1-99min Can be set |
| Host size | 270*200*140mm | Horn | 3mm |
| Control mode | Automatic, manual switchable (optional foot switch) | Processing capacity | 0.5-100ml |
| Pulser | 0.1-99s Adjustable (gap/work) | power supply | 220V/50HZ |
| Operating frequency range | 19-25HZ | Display method | LCD |
Precautions:
(1) It is strictly forbidden to turn on the ultrasonic probe when it is not inserted into the solution, otherwise it will damage the instrument.
(2) The length of time is selected according to the amount of cell breakage.
(3) The water in the boxed ice water mixture should not exceed the height of the liquid to be broken in the beaker. Otherwise, when the ultrasonic is broken, the beaker will rotate continuously, so that the probe is not in the optimal position of the ultrasound.
(4) The distance between the bottom of the beaker and the probe should not be too close, otherwise the bottom of the beaker will rupture during ultrasonication.
