MG200 Mortar Grinder
Product manual
Mortar Grinder MG200 is used to grind, homogenize and mix a wide range of sample with dry/wet or cryogenic condition, which can grind hard, soft, brittle and pasty samples. They have extraordinary performance on the processing capacity, as well as easy and safe to operating.
Working principle
The sample enter the grinding area between the pestle and mortar via hopper and is crushed by pressure and friction. The function of the scraper is to feed the material into the area between the mortar and pestle. This forced feed ensures that the whole sample is continuously subjected to the grinding and is also intensively mixed.
Instrument parameters
1. Feed size: <10mm
2. Final fineness: <5um
3. Speed: 50-130rpm, speed is adjustable
4. Batch quantity: 10-200ml
5. Rates power: 230W
6. Power supply: 220V, 50/60Hz
Grinding accessories–six kinds of material for your choice
Stainless steel—-Corrosion resistant, preventing rust
Hardened steel—-Low cost, popular quality
Tungsten carbide—-High hardness
Sintered aluminum oxide—-High hardness and purity
Agate—-Heavy metal free, ensure the purity of sample
Zirconium oxide—-High hardness, high strength, high tenacity, high wear resistance and chemical corrosion
Selection guide for mortar and pestle
| We recommend that the material of mortar and pestle must be same. | ||||||
| Grinding set material | Feed size | Abrasion resistance | Sample type | Dry grinding | Wet grinding | Cryogenic grinding |
| Stainless steel | 10mm | Good | Medium-hard,brittle | Yes | Yes | Yes |
| Hardened steel | 10mm | Good | Medium-hard,brittle | Yes | Yes | Yes |
| Tungsten carbide | 10mm | Very good | Medium-hard,fibrous | Yes | Yes | No |
| Agate | 8mm | Good | Medium-hard,soft | Yes | Yes | No |
| Sinter aluminum oxide | 8mm | Normal | Medium-hard,soft | Yes | Yes | No |
| Zirconium oxide | 10mm | Good | Medium-hard,soft | Yes | Yes | No |
