Circulating baths are constant temperature water baths that enable rapid heating and cooling of samples by constantly circulating water. Efficient temperature maintenance can be performed over a wide range of temperatures.
This laboratory circulating water bath is ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors.
DC-2006 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use.
Powerful force/suction pump provides constant flow rates, while 2nd generation controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
IMPORTANT! -20°C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).
|
The circulating bath can be connected to RS232 or 485 communication (customize this function) |
| Feature |
| ● Using enviromentally friendly CFC-free refrigeration technology to meet the requirements of enviromental protection. |
| ● Using high-quality full-enclosed air-cooled compressor cooling systemwith thermal overload protection automatically, low noise |
| ● With a power-off protection function, automatically delayed for three minutes |
| ● Using 7″ touch display, easy to understand working condition |
| ● Easy to operate, can set the temperature quickly with soft button,Upper and lower temperature alarm can be set |
| ● Intelligent PID automatically adjust control function |
| ● Using analogue theory , automatic identify the difference between set temperature and the ambient temperature, to confirm whether a single heating or cooling heating work simultaneously to achieve the energy saving |
Standard package
Precautions
The liquid medium must be added in the thermostat before use. Otherwise, the heater will be damaged when the power is on. The liquid level of the medium should be lower than 30mm of the table.
Export in bulk to the U.S.
Other circulating bath series
The temperature range of the circulating bath is -40℃-200℃, which can meet the constant temperature test of a variety of samples.
Technical Parameters
