HL Series -100°~100° Process Temperature Control System (Heating And Cooling)

Products Description

HL Series -100°~100° Process Temperature Control System

The use of fully closed pipe design, reduce the demand for thermal fluid, improve the heat utilization rate of the system, to achieve rapid temperature rise and fall. The thermal conductivity medium in the expansion vessel does not participate in the cycle, which can reduce the risk of the thermal conductivity medium absorbing water and volatilization during operation.

Fully Enclosed Circulation

No need to change the heat transfer medium, improve heat transfer efficiency and reduce the risk of heat transfer medium evaporation and moisture absorption.

Sinkless design

Faster cooling rate

Intuitive Level Viewer

Convenient for users to observe the liquid level

High Temperature Cooling

Design temperature range can be opened cooling continuous cooling high temperature 200 ℃ directly open the compressor cooling

Over temperature protection

Automatically cut off the heating power after exceeding the user’s set value

Programmed temperature control

Multi-temperature point program control

Application Areas

1 Reaction still:

The reactor is widely used in petroleum, chemical, rubber, pesticide, dye, medicine, food and other production users and various research and experimental projects, complete hydrolysis,neutralization, crystallization, distillation, evaporation, storage, hydrogenation, polymerization,condensation, heating mixing, constant temperature reaction and other processes.

During temperature control, the temperature is stable, the rate of rising and cooling is fast, and

the temperature of the reaction process can be recorded in real time.

2 Microchannel reactor:

Microchannel reactor can perform different types of reactions, suitable for fast (strong exothermic) reaction, liquid reaction, gas-liquid reaction, absorption and exothermic reaction, can be used for nitration reaction, sulfonation reaction, oxidation reaction, peroxidation reaction, alkylation reaction, amination reaction, photogasification reaction and other reaction processes. It can be used for micro-reaction process development and fine chemical synthesis.

The equipment has a wide temperature range, high precision intelligent temperature control, single fluid temperature control, no need to replace the thermal medium, efficient and stable.

New energy vehicle testing product-1462-205

In the new energy vehicle industry, temperature control is mainly used in testing, testing benches and material testing. Most of the components in the car are tested under extreme temperature changes to ensure normal operation and reliability before being put into practical use. Testing many different components on a test stand is important for improving quality and reliability. Simulating very wide temperature ranges as well as extreme ambient temperatures is an important part of material testing.

Multiple samples can be controlled at the same time, and the control system can record and export the temperature data during the test process, which can meet the test conditions of most components under extreme temperature changes

Application

New Energy Vehicle Testing

– Rapid aging tests in the development of batteries and electrical components

– Final Inspection Testing of Electric Vehicle Devices

Aerospace industries

– Simulation of extreme conditions in space

– Aging tests for devices and materials

– Functional testing of electronics units

Chemical and pharmaceutical

– Microchannel reaction synthesis temperature control

– Dynamic temperature control of reactors

– Temperature control of low-temperature reactions in metal-organic synthesis

Bioproduction

– Thermostatic control of biological disposable reactors

– Rapid cooling of reaction processes

– Control of the amplification production process

Technical Parameters

model	HL25W-820	HL35W-820	HL55W-820	HL75W-820	HL100W-820
Heating power	2.5kW	3.5kW	5.5kW	7.5kW	10.0kW
Cooling capacity 200°C	2.5kW	3.5kW	5.5kW	7.5kW	100kW
Cooling capacity 100°C	2.5kW	3.5kW	5.5kW	7.5kW	10.0kW
Cooling capacity 20°C	2.5kW	3.5kW	5.5kW	7.5kW	10.0kW
Cooling capacity -60°C	1.0kW	1.4kW	1.6kW	3.0kW	3.3kW
Cooling capacity -75°C	0.3kW	0.42kW	0.7kW	1.3kW	1.4kW
Circulation pump flow	Max20L/min	Max25L/min	Max35L/min	Max50L/min	Max60L/min
Circulation pump pressure	2bar	2bar	2bar	2bar	2bar
compressor	Embraco	Emerson Copeland
Expansion valve	Danfoss
Thermal medium interface	DN15	DN20	DN20	DN20	DN25
20 degrees cooling water demand	1.2m³/h	1.5m³/h	1.8m³/h	2.6m³/h	3.2m³/h
	1.5bar~4bar	1.5bar~4bar	1.5bar~4bar	1.5bar~4bar	1.5bar~4bar
Cooling water connection	DN15	DN20	DN20	DN20	DN25
Dimensions (mm) Water-cooled	4006001150	4506001150	5006501250	5507001600	6506701650
Dimensions mm Air Cooling	4006501250	4506501300	5506501400	5507501650	6507001650
Weight Water Cooling	170kg	185kg	265kg	305kg	340kg
Weight Air Cooled	200kg	225kg	300kg	340kg	380kg
power supply	AC 380V 50Hz	AC 380V 50Hz	AC 380V 50Hz	AC 380V 50Hz	AC 380V 50Hz
Total Power	6.5kW(max)	10kW(max)	13kW(max)	17kW(max)	22kW(max)

model	HL25W-820	HL35W-820	HL55W-820	HL75W-820	HL100W-820
model	HL150W-820	HL250W-820	HL380W-820	HL600W-820	HL950W-820
Heating power	15kW	25kW	38kW	60kW	95kW
Cooling capacity 200°C	15kW	25kW	38kW	60kW	95kW
Cooling capacity 100°C	15kW	25kW	38kW	60kW	95kW
Cooling capacity 20°C	15kW	25kW	38kW	60kW	95kW
Cooling capacity -60°C	5.8kW	10kW	16kW	23kW	32kW
Cooling capacity -75°C	2.4kW	5kW	8kW	11kW	14kW
Circulation pump flow	Max110L/min	Max150L/min	Max200L/min	Max250L/min	Max400L/min
Circulation pump pressure	2.5bar	2.5bar	2.5bar	2.5bar	2.5bar
compressor	Embraco			Italy Duolin/Bitzer/Fujihao
Expansion valve	Danfoss
Thermal medium interface	DN25	DN32	DN40	DN40	DN50
20 degrees cooling water demand	7m³/h	10m³/h	14m³/h	20m³/h	30m³/h
20 degrees cooling water demand	1.5bar~4bar	1.5bar~4bar	1.5bar~4bar	1.5bar~4bar	1.5bar~4bar
Cooling water interface	DN25	DN32	DN40	DN40	DN50
Dimensions (mm) Water-cooled	7008001650	10009501650	10009501750	200012501750	200012501750
Dimensions mm Air Cooling	7507501800	/	/	/	/
Weight Water Cooling	380kg	980kg	1150kg	1380kg	1750kg
Weight Air Cooled	/	/	/	/	/
power supply	AC 380V 50Hz	AC 380V 50Hz	AC 380V 50Hz	AC 380V 50Hz	AC 380V 50Hz
Total Power	33kW(max)	56kW(max)	90kW(max)	140kW(max)	180kW(max)