The ultrasonic cleaning effect is good, the operation is simple, and the application range is wide. The sound that people hear is an acoustic signal with a frequency of 20-20000 Hz. The sound wave higher than 20000 Hz is called ultrasonic wave, and the transmission of sound wave propagates longitudinally according to the sinusoidal curve, generating a large number of small bubbles.
One reason is that a tensile stress is locally generated in the liquid to form a negative pressure. The decrease in pressure causes the gas originally dissolved in the liquid to be supersaturated, and escapes from the liquid to become small bubbles; another reason is that the strong tensile stress tears the liquid apart. “Because of a hollow, called cavitation
Main Technical Parameters:
| Model | Inner tank | volume | Frequency
|
Ultrasonic power | Heating power | Temperature adjustable | Time adjustable | Drainage | Rack |
| ( mm)L/W/H | L | KHz | W | W | OC | min | |||
| SB-100DT | 300*150*100 | 4.5 | 40 | 100 | 200 | RT+5-80 | 1-99 | / | √ |
| SB-120DT | 240*140*100 | 3 | 40 | 120 | 200 | RT+5-80 | 1-99 | / | √ |
| SB-120DT | 240*140*150 | 5 | 40 | 120 | 200 | RT+5-80 | 1-99 | / | √ |
| SB-3200DT | 300*155*150 | 6 | 40 | 180 | 400 | RT+5-80 | 1-99 | / | √ |
| SB-5200DT | 300*240*150 | 10 | 40 | 200 | 800 | RT+5-80 | 1-99 | √ | √ |
| SB-5200DT | 300*240*150 | 10 | 40 | 250 | 800 | RT+5-80 | 1-99 | √ | √ |
| SB-5200DT | 300*240*150 | 10 | 40 | 300 | 800 | RT+5-80 | 1-99 | √ | √ |
| SB-4200DT | 300*240*200 | 14.4 | 40 | 400 | 800 | RT+5-80 | 1-99 | √ | √ |
| SB-12DT | 500*300*150 | 22.5 | 40 | 500 | 1000 | RT+5-80 | 1-99 | √ | √ |
| SB-12DT | 500*300*150 | 22.5 | 40 | 600 | 1000 | RT+5-80 | 1-99 | √ | √ |
| SB-800DT | 600*300*200 | 30 | 40 | 800 | 1000 | RT+5-80 | 1-99 | √ | √ |
| SB-1000DT | 600*300*300 | 54 | 28 | 1000 | 3000 | RT+5-80 | 1-99 | √ | √ |
| SB-1200DT | 600*400*300 | 72 | 28 | 1200 | 4000 | RT+5-80 | 1-99 | √ | √ |
| SB-1500DT | 600*500*300 | 90 | 28 | 1500 | 4000 | RT+5-80 | 1-99 | √ | √ |
| SB-1800DT | 600*600*300 | 108 | 28 | 1800 | 4000 | RT+5-80 | 1-99 | √ | √ |
| SB-2000DT | User offer size | 120 | 28 | 2000 | 6000 | RT+5-80 | 1-99 | √ | √ |
| SB-3600DT | User offer size | 207 | 28 | 3600 | 8000 | RT+5-80 | 1-99 | √ | √ |
Cleaning tips
Ultrasonic cleaner overflow
If there is too much oil slick on the surface of the cleaning tank. The overflow of the washing machine should be opened to remove it to prevent secondary contamination of the workpiece being cleaned. The specific operation is as follows: open the overflow discharge valve, and inject water or cleaning liquid into the cleaning tank until the cleaning liquid begins to overflow (it is recommended to use a scraper-like appliance to cut the oil in the direction of the overflow to promote its rapid outflow). Keep the overflow drain valve closed to prevent ground contamination from accidental overflow.
Ultrasonic cleaning machine post processing
Remove the cleaned parts, thoroughly blow off the residual cleaning solution in each hole with compressed air, and blow dry the surface (recommended with a blow gun and air compressor). If there are conditions, the pool is well arranged near the washing machine. In order to rinse the removed parts.
Application:
Jewelry Markets Retail/Wholesale: Tabletop models for cleaning finished goods, watches, chain, rings, etc. by the piece or in bulk.
Jewelry Manufacturing: General Jewelry Cleaning. Finite removal of investment after casting. Removal of rouge and other buffing and polishing compounds. Removal of oil/grease in chain manufacturing process.
Dental Labs: Can be used in the lab or office for finite cleaning of instruments with maximum power and delicate cleaning of cosmetic/corrective mouthpieces with adjustable power setting.
Hospital/Surgical: Absolute cleaning of surgical instruments, artificial components, etc… Sterilization chemicals can be added to beakers and used in the tank.
Tattoo: Clean needles, nozzles, brushes, filters.
